Quantcast
Channel: Pistols - Athlon Outdoors
Viewing all 1633 articles
Browse latest View live

Gun Review: On the Firing Line with the Kimber Amethyst Ultra II

$
0
0
Kimber Amethyst Ultra II pistol left profile Kimber Amethyst Ultra II pistol shooting Kimber Amethyst Ultra II pistol rear sight Kimber Amethyst Ultra II pistol rear sight left angle Kimber Amethyst Ultra II pistol serrations Kimber Amethyst Ultra II pistol slide right profile

Amethyst, a beautiful young virgin, became the strongest desire of Dionysus, the Greek god of drunkenness and revelry. Desiring to remain pure, she denied his affections. Angered, Dionysus released his white tigers to devour Amethyst. She cried out to the goddess Diana, who quickly intervened to spare her life and turned Amethyst into a statue of white shimmering quartz. The pure maiden was forever a statue. Realizing what he had caused, Dionysus began to weep. His tears of red wine poured over the crystalized maiden, changing her white crystalized quartz into beautiful hues of purple.

Amethyst is derived from the Greek word amethustos, meaning sober. Greek mythology has many variations of this story. But the legend led people throughout history to believe that if you had an amethyst or drank from an amethyst cup, it would prevent drunkenness, keep you sober and keep you watchful. So, essentially, many would drink to inebriation from amethyst cups, believing they were sober.

This story came to mind as I opened the hard case revealing the exquisite Kimber Amethyst Ultra II. I decided not to holster it and go on a bender in hopes that I’d remain sober. However, there’s something mystical and captivating when you’re in the presence of this handgun. Kimber is known for its ability to take power, strength and reliability and embody those qualities with luxurious beauty. Amethyst in hand, admiring the varying shades of purple and silver, my eyes wandering slowly over every intricate detail, I wasn’t sure if I should go to the range and fire it or display it in my home for everyone to admire. But my wonderment quickly passed after one dry-fire round. This amethyst goddess was taunting me to fire her.

On The Firing Line

My range day with the Amethyst Ultra II was memorable. Being the only woman in the group, I had prepared myself for the teasing I was certain would ensue from showing up with a purple gun. I’m the girl who goes against the grain—no pink holster, no pink gun, nothing girlie. Although I am feminine, it’s just not me. My personality goes beyond pink guns. So, I was pretty sure the guys would flip when they saw me with anything of color.

Surprisingly, there were no comments. Instead, they couldn’t wait to get their hands on the Amethyst Ultra II, even to the point of bartering and trading ammunition to hold and fire it. This gun taunts you, like a temptress begging to be touched. I took it into my hands, loving the feel of the cold, hearty steel. My fingers tracing over the round-heel frame, I exposed it to the snow and brisk 20-degree weather.

“All right, Amethyst,” I thought. “You’re definitely an exotic, alluring, beautiful work of art, but are you strong? Do you have what it takes to hold your own in the defensive handgun realm?” I was about to find out.

Instead of just holding its own, the Kimber Amethyst Ultra II set the pace. I ran three different types of 9mm Hornady ammo through the gun: 115-grain Critical Defense FTXs, 115-grain American Gunner XTPs and 147-grain Custom XTPs. I also tested it with some cheaper ammo to see how it would perform. The Amethyst didn’t waver. Its performance was flawless no matter what I fed it. And I tested the gun from a defensive perspective. I wanted to run it as I would any other gun I would use for defense. My groupings were tight and consistent. I also cannot say enough about the trigger. It was so easy and smooth, with a nice, short reset, breaking at just more than 4 pounds. And considering the gun has minimal recoil and boasts Tactical Wedge three-dot tritium night sights, it was easy to reacquire the sights for fast follow-up shots.

Worth The Price

Kimber offers this pistol in .45 ACP and 9mm. Beneath the amethyst PVD coating is a highly polished stainless steel slide. At only 4.75 inches tall, 6.8 inches long and weighing just 25 ounces unloaded, the gun is an easy choice for daily carry. The round-heel frame, along with the gun’s rounded and blended edges, prevents snags on clothing or holsters. The ambidextrous thumb safety, full-length guide rod and solid-aluminum trigger add to the list of positives, proving the defensive handgun capabilities of this gun. It’s standard Kimber, which means it’s worthy and ready to go out of the box.

As I said, my range day was memorable. My male counterparts did not view the Amethyst as a girlie gun. It doesn’t share the stereotype of pink guns. The Amethyst is a sleek, well-crafted work of art that is as solid and strong as it is beautiful. This is a gun you can trust to carry daily and protect you if needed. This is Kimber, folks. In a tactical world full of gun mods and OD green, Kimber has kept the art of craftsmanship and delicate detailing alive without losing durability or reliability. Its guns are as strong as they are visually captivating.

The Amethyst Ultra II is unique. There is something mesmerizing when it’s in your presence. If you get the chance, before you form an opinion, hold it in your hands. I guarantee you will feel the strength that underlies its beauty. Sound dramatic? Maybe a bit. But perhaps the mythology isn’t so far-fetched. It’s a beauty frozen in time, stained with purple tears, ever ready, ever vigilant, protecting those who keep it close.

Kimber Amethyst Ultra II Specs

Caliber: 9mm
Barrel: 3 inches
OA Length: 6.8 inches
Weight: 25 ounces (empty)
Grips: G10
Sights: Three-dot tritium
Action: SA
Finish: Satin silver, amethyst PVD
Capacity: 8+1
MSRP: $1,652

For more information, visit kimberamerica.com.

This article was originally published in the winter/spring 2018 issue of “Personal Defense World.” To order a copy and subscribe, visit outdoorgroupstore.com.

The post Gun Review: On the Firing Line with the Kimber Amethyst Ultra II appeared first on Personal Defense World.


Now Shipping: The Springfield 911 .380 Pistol in Black Nitride

$
0
0

Springfield Armory kicked off 2018 by announcing its 911 .380 ACP pistol for EDC. Now the Illinois-based company has revealed it is shipping the gun with a black nitride finish. Black nitride is a corrosion and abrasion-resistant finish. This ensures the gun will withstand harsh use while still maintaining its function and accuracy. The nitriding process involves hardening the outermost later of the stainless steel frame. More on the Springfield 911 in the press release below:

Springfield 911

Springfield Armory engineers optimized the 911’s frame-to-slide-to-trigger guard relationship to create handling characteristics unique among small pistols. While many pocket guns can be difficult to shoot, Springfield Armory’s gunsmiths specifically designed the comfortable feel, confident control and minimal recoil in their .380 platform to encourage both practice and carry. 

The 911 .380 features a G10 short-reset pivoting trigger with a light 5-pound pull, a differentiating and satisfying feature in such a small pistol. It also has an extended ambidextrous safety to ensure easy manipulation under stressful situations and confirms that the weapon won’t fire before the operator intends. A hammer provides peace of mind with both visual and tactile cues for various modes of carry.

For quick target acquisition, the 911 comes with a bright tritium low-profile tactical rear sight, paired with a low-profile combat Pro-Glo tritium and luminescent front sight.  The low-profile design ensures a snag-free draw, to put the firearm between operator and attacker as quickly as possible. G10 Octo-Grip on the mainspring housing, and Octo-Grip front strap texturing, allows for secure grip contact without tearing up your clothes while carrying concealed.   

The 911 .380 features a flush 6-round magazine or 7 round magazine with a Mag X-Tension.

Touted as an ideal carry pistol or backup gun, the black nitride Springfield 911 is priced at $599. A version with an integrated green Viridian laser is available for $789.

For more information, go to Springfield-Armory.com.

The post Now Shipping: The Springfield 911 .380 Pistol in Black Nitride appeared first on Personal Defense World.

Small Arms Survey: The US Has More Guns Than People

$
0
0
small arms survey gun shop small arms survey ar-15 shooting small arms survey steyr l40-a1 pistol

A new study has revealed that there are more than 393 million guns owned by red-blooded Americans. To put that in perspective, every single person in the country could own a gun, and there would still be 67 million of them left to spare.

Small Arms Survey Global Gun Ownership

According to the Washington Post, those numbers come from the Small Arms Survey, a research project operating at the Graduate Institute of International and Development Studies in Geneva. The goal of the annual survey is to provide “evidence-based, impartial, and policy-relevant knowledge on all aspects of small arms and armed violence,” its website states.

On a global level, the study says there are an estimated 1.013 billion firearms numbers worldwide. 857 million of those firearms, or 85 percent, are in civilian hands. That number rose from 650 million in 2006. In addition, 133 million, or 13 percent, of guns are in military arsenals. 23 million, or two percent, are owned by law enforcement agencies.

Civilian Gun Ownership

Looking at the numbers on a more micro level, the United States owns 393,300,000 of the civilian firearms, or 46 percent, which is “more than those held by civilians in the other top 25 countries combined,” the AP reported. The other four countries in the top five for civilian-owned guns are India at 71,100,000; China at 49,700,000; Pakistan with 43,900,000; and the Russian Federation with 17,600,000.

The United States also dominates when it comes to civilian firearm holdings per 100 residents. Stats indicate that the U.S. has 120.5 firearms per 100 residents. That number is more than twice that of the next-highest country, Yemen, which has 52.8 guns per 100 residents.

The numbers for civilian gun ownership include both legal and illegal firearms. It factors in pistols, revolvers, rifles, and shotguns. There’s also a “miscellaneous” category that includes black-powder firearms, subguns, pistol-grip firearms, “starter guns, and other kinds of firearms.”

“The key to the United States, of course, is its unique gun culture,” the report’s author, Aaron Karp, said at a press conference. “American civilians buy an average of 14 million new firearms every year, and that means the United States is an overwhelming presence on civilian markets.”

The study says it looked at national rearms registration statistics; general population surveys about rearm ownership; experts’ estimates of civilian holdings; and if none of those were available, then “analogous comparisons based on estimates for comparable countries.”

Military & Law Enforcement Ownership

While the study shows that civilians in the United States are enthusiastic about firearms, it also has the U.S. trailing behind Russia, China, North Korea and Ukraine, in that order, for military-owned firearms. Furthermore, the U.S. lags behind Russia, China, India and Egypt when it comes to law enforcement-owned firearms.

Advocacy

Eric Berman, the director of the Small Arms Survey, claims his organization isn’t an “advocacy” group.

“We don’t advocate disarmament. We are not against guns,” he said. “What we want to do, and what we have done successfully for the last 19 years, is to be able to provide authoritative information and analysis for governments so that they can work to address illicit proliferation and reduce it — and to reduce also the incidents of armed violence.”

In any event, the Small Arms Survey shows that a growing number of Americans are exercising their Second Amendment right to bear arms.

The post Small Arms Survey: The US Has More Guns Than People appeared first on Personal Defense World.

LA Sheriff’s Department Seizes More Than 500 Guns From Felon’s Home

$
0
0
la sheriff guns seized la sheriff guns rifles la sheriff gun collection la sheriff rifles truck

The Los Angeles County Sheriff’s Department seized more than 500 firearms from the home of a convicted felon who is reputed to be a collector last week.

LA Sheriff’s Department Gun Bust

The bust got set into motion when the LASD Palmdale Station got a tip that a man in Agua Dulce—an area 44 miles north of Los Angeles—had a “large arsenal” of firearms. The tipster also mentioned that the man was a convicted felon, which would prevent him from legally owning any firearms at all.

On June 14, a team that included investigators with the LASD Palmdale Station, the ATF and the California DOJ executed a warrant on the home of 60-year-old Manuel Fernandez. 432 firearms were discovered inside the residence, including pistols, revolvers, rifles and shotguns.

Through the course of the investigation, authorities discovered a second home in Agua Dulce connected to Fernandez. Police obtained a warrant for that address. When the home was searched, police found 30 firearms owned by somebody the LASD refers to as a “female associate.” The woman wasn’t home when the warrant was executed; she hasn’t returned to the address. The LASD is preparing to file charges against her.

A follow-up warrant to Fernandez’s home the next day led to the seizure of 91 additional guns. The guns were hidden at various spots throughout the home. Investigators also seized computers, cell phones and hard drives believed to have been used by Fernandez to make the gun buys.

All told, 553 guns police seized during the investigation.

Additional Details

LASD detectives have called upon the ATF for help tracing the “purchase origination” of the guns.

“This case is a testament to the community’s involvement in reducing crime and taking guns out of the hands of criminals,” said Los Angeles County Sheriff Jim McDonnell. “The swift response … showed the positive result of our campaign ‘See Something, Say Something.'”

According to the Los Angeles Times, “sources familiar” with the case say Fernandez is a gun collector, as opposed to somebody “about to use the guns for violence.”

Nevertheless, police arrested Fernandez and booked him on charges of being a felon in possession of firearms; possession of an assault rifle; felon in possession of ammunition; and possession of large capacity magazines.

The LASD statement doesn’t state the nature of Fernandez’s previous felony conviction. ABC News cites jail records that say Fernandez was sentenced to 486 days in jail for an “unspecified” felony conviction in February 2017. He was released in August 2017.

Fernandez is due to appear in court on July 9.

The post LA Sheriff’s Department Seizes More Than 500 Guns From Felon’s Home appeared first on Personal Defense World.

Hogue Releases HandALL Grip Sleeve for the Ruger Security-9

$
0
0
hogue handall beavertail grip sleeve ruger security-9 hogue handall beavertail grip sleeve ruger security 9 color options hogue handall beavertail grip sleeve ruger security 9 aqua

Hogue has unveiled a new HandALL Beavertail Grip Sleeve designed specifically for the Ruger Security-9 pistol.

Hogue HandALL Beavertail Grip Sleeve

In a press release, the company said it decided to create a model-specific version of the HandALL Beavertail Grip Sleeve after it realized that the Security 9’s grip frame prevents it from accepting replaceable grips.

“Due to its built-in grip frame, the Security 9 will not accommodate replaceable grips,” said grip designer Matt Hogue. “Our solution was to create a model of our HandALL Beavertail Grip Sleeve that works with the firearm’s existing nylon frame to add comfort along with a precision fit.”

To install the Beavertail Grip Sleeve on the Security 9, you simply slip it over the gun’s grip frame until it’s in position. The sleeve is designed to match the contours of the Security 9’s nylon frame. It also provides finger grooves, ensuring better handling and control. According to the company, these lead into a gentle palm swell that naturally fits in the hand. As one would expect, the beavertail in the grip sleeve rises high along the frame’s backstrap. The beavertail also provides better distribution of recoil forces, which is a major plus for the shooter.

The sleeve is built from a thermoplastic elastomer compound. The press release says the rubber ages “gracefully” and “keeps a firm, tacky feel throughout the life of the grip. It will not harden, split or crack with age or usage.” Furthermore, the surface sports Hogue’s Cobblestone texture.

Hogue’s HandALL Beavertail Grip Sleeve for the Ruger Security 9 is priced at $10.95 in black. It also comes in OD green, flat dark earth, aqua, pink and purple for $12.95.

Ruger Security-9

Released at the tail end of 2017, the Ruger Security 9 is a mid-sized centerfire pistol chambered in 9mm. It comes with a four-inch barrel; 15-round, double-stack magazine; blued, through-hardened alloy steel slide; one-piece, precision-machined aluminum chassis with full length guide rails; short, crisp trigger pull; drift adjustable 3-dot sights; and an ergonomic glass-filled nylon grip frame with an integral accessory rail. It weighs 23.7 empty, measures 7.24 inches in overall length, and is five inches in height.

For more information on Hogue, visit Hogueinc.com. To learn about the Ruger Security-9, watch the videos below and visit Ruger.com.

The post Hogue Releases HandALL Grip Sleeve for the Ruger Security-9 appeared first on Personal Defense World.

FIRST LOOK: S&W’s Performance Center Model 19 Carry Comp Revolver

$
0
0
Smith & Wesson Performance Center Model 19 Carry Comp Revolver ammo Smith & Wesson Performance Center Model 19 Carry Comp Revolver .357 Magnum Smith & Wesson Performance Center Model 19 Carry Comp Revolver lead Smith & Wesson Performance Center Model 19 Carry Comp Revolver right Smith & Wesson Performance Center Model 19 Carry Comp Revolver left Smith & Wesson Performance Center Model 19 Carry Comp Revolver grip

Smith & Wesson introduced its Model 19 Combat Magnum in November of 1955. It quickly became the queen of S&W’s revolver line.

The Model 19 was a work of art with sleek lines and featured either a deep luster blue or a brilliant nickel finish. The walnut stocks were hand fitted and the internal parts were polished and fitted by real gun smiths. Options included a 2.5-, 4- or 6-inch barrel, a wide target trigger and hammer, a red ramp front sight, and a white outline rear sight blade.

According to legendary Border Patrol officer, Bill Jordan, it was the perfect gunfighter’s revolver. However, as time progressed, the demand for revolvers was replaced by the craving for polymer wonder nines. Much to my disappointment, in 1999, Smith & Wesson discontinued the Model 19.

Model 19 Revival

At the 2018 NRA Annual Meetings, Smith & Wesson reintroduced the Model 19 in two models: the Classic and the Carry Comp.

The Model 19 Classic features a 4-inch” barrel and retro Magna stocks. It also has a bright blue finish and will appeal to those wanting a retro revolver.

Meanwhile, the Model 19 Carry Comp is a Performance Center model designed as the ideal personal defense fighting revolver.

Model 19 Carry Comp Features

The Performance Center Model 19 Carry Comp is based on an updated K-frame design. At the heart of the Carry Comp is a 3-inch barrel that features a single chamber PowerPort. The actual barrel of the Carry Comp is 2.5 inches with the integral comp adding an additional half-inch.

The new Model 19 features a number of improvements over the original guns; one of which is a ball/detent locking system for the cylinder crane to strengthen the lockup.

The Carry Comp retains traditional Smith sights with a fully adjustable rear sight and a pinned front sight that features a tritium insert. Smith & Wesson’s Performance Center tuned the trigger and installed an over-travel stop.

In addition, the Performance Center rounded the profile of the hammer to reduce the profile for concealed carry.

The double action is smooth with no grit while the single action breaks cleanly at 5 pounds. The stocks are a composite wood material that are similar to boot stock. I noted the actual frame is a round butt shape that allows for more compact stocks.

On the Range

Being an old wheelgunner, I immediately took to the little Carry Comp.

On first examination, I found that the factory stocks were not well-fitted to the frame. They also didn’t fit my hand well. A quick call to the great folks of Crimson Trace solved the problem. I replaced the factory stocks with a set of CTC LG-306 Lasergrips. I have used CTC stocks for more than 20 years and have a great appreciation for them.

As I found, the rear sight blade is significantly shorter and the notch shallower than on a vintage 19; this made indexing the front sight a little more difficult.

On the range the Model 19 Carry Comp handled even the heaviest Magnum loads reasonably well.

I shot both the Speer Gold Dot 125 gr. GDHP and the Federal 158 gr. Hydra Shok Magnum loads. The Gold Dot averaged 1,264 fps while the Hydra Shok averaged 1,144 fps. These are stout loads, but manageable.

I shot the Carry Comp next to an older 3-inch S&W Model 65 in an attempt to judge the effectiveness of the compensator. Subjectively, I would estimate that the Carry Comp has about 30 percent less muzzle flip than the Model 65. The Speer .38 Special +P 125 gr. Gold Dot was much more controllable and pleasant to shoot.

All of the loads produced sub-2-inch groups at 25 yards, as long as I did my job.

For more information, please visit Smith-Wesson.com.

S&W Performance Center Model 19 Carry Comp Specifications

  • Caliber: 357 Magnum; .38 Special
  • Capacity: 6
  • Barrel Length: 3 inches
  • Overall Length: 8 inches
  • Front Sight: Tritium Night Sight
  • Rear Sight: Black Blade Adjustable
  • Action: Single/Double Action
  • Grip: Custom Wood and Synthetic Included
  • Weight: 34.1 ounces
  • Cylinder Material: Carbon Steel
  • Barrel Material: Stainless Steel
  • Frame Material: Carbon Steel
  • Finish: Glassbead Black
  • MSRP: $1,092

The post FIRST LOOK: S&W’s Performance Center Model 19 Carry Comp Revolver appeared first on Personal Defense World.

Washington Home Intruder Yells ‘I’m So High!’ After Getting Shot

$
0
0
washington teen home intruder bullet hole washington teen home intruder bedroom

A 16-year-old home intruder in Parkland, Wash., earned himself a trip to the hospital after meeting the business end of a homeowner’s handgun last weekend.

Homeowner Shoots ‘High’ Home Intruder

The homeowner told Pierce County Sheriff’s Office deputies her husband was out of town for business when—at around 3:15 a.m. on June 16—she was suddenly awoken by her two dogs barking. She then heard a scratching noise. Alarmed, she went to her bedroom door and looked down the hallway. That’s when she saw a man inside her home.

Police said the suspect started walking down the hallway toward the homeowner’s bedroom. The homeowner ran, grabbed a gun and ordered the intruder not to move. When he didn’t stop, the woman fired a warning shot to the suspect’s side. Undeterred, the intruder kept coming. In fear for her life, the woman aimed her gun at the suspect and pulled the trigger, shooting him in the arm.

The armed homeowner held the injured suspect at gunpoint while she called 911. She said that while she waited for authorities to arrive, the suspect repeatedly yelled, “I’m so high!” until he collapsed.

Police Arrive

Deputies arrived on the scene and found the suspect on the floor by the front entryway. One deputy applied a tourniquet on the suspect’s arm while other deputies cleared the house. Another deputy, trained as a military combat medic, applied a second tourniquet and bandaged an exit wound on the suspect’s shoulder blade. Paramedics then arrived on the scene and transported him to an area hospital.

A bullet hole was found in one of the windows of the home. Deputies believe it to be the warning shot fired by the homeowner. In addition, a front bedroom window was open. Presumably, this is how the suspect gained entry into the home.

The unidentified 16-year-old intruder will be charged with one count of residential burglary when he gets out of the hospital. There’s no word on charges for the homeowner. Based on what we know about this case, however, charges don’t seem likely.

The post Washington Home Intruder Yells ‘I’m So High!’ After Getting Shot appeared first on Personal Defense World.

Now Available: Threaded Barrels for the Hudson H9 Pistol

$
0
0
hudson h9 threaded barrel right angle hudson h9 threaded barrel closeup hudson h9 threaded barrel profile hudson h9 threaded barrel compensator hudson h9 pistol right angle hudson h9 pistol left profile

Hudson Manufacturing has announced the availability of threaded barrels for its unique H9 pistol.

According to the product listing, the drop-in barrel sports a nitride finish and a 1/2 x28 thread pitch, giving users the chance to run the Hudson H9 with a suppressor or compensator.

“This drop-in factory barrel provides the opportunity to mount your favorite can for polite shooting or your favorite compensator for rude, but arguably more fun endeavors,” Hudson says.

The threaded variant of the Hudson’s patent-pending barrel design was tested under a high-speed camera. The test, the company alleges, showed that the H9 threaded setup “outperforms industry standards.”

If you want to attach a standard can, the H9 threaded barrel requires a Nielsen-type device. Furthermore, the company recommends subsonic ammunition for optimum suppression levels. It also suggests using 124 grain or heavier loads for the best performance.

The Hudson H9 debuted at SHOT Show 2017, quickly turning heads for its futuristic appearance and interesting features. Hyped as a marriage between a 1911 and striker-fired gun, the 9mm H9 features a 1911-style, single axis, straight pull trigger with an integrated trigger safety; uniquely low bore axis; VZ G10 grip panels; ambidextrous slide stop levers; reversible magazine catch; Trijicon HD front sight; double stack magazine capacity of 15+1; textured lower back strap made by Hogue out of G10 material; and a black nitride finish.

For more, check out hudsonmfg.com.

Hudson H9 Specs

Caliber: 9mm
Barrel: 4.28 inches
OA Length: 7.63 inches
Weight: 34 ounces (empty)
Grips: VZ G10
Sights: Trijicon HD front, adjustable rear
Action: Striker-fired
Finish: Matte black
Capacity: 15+1
MSRP: $1,147

The post Now Available: Threaded Barrels for the Hudson H9 Pistol appeared first on Personal Defense World.


Nighthawk Turnbull VIP 2: A $7K Pistol Worth Every Penny

$
0
0
Nighthawk Turnbull VIP 2 pistol left angle Nighthawk Turnbull VIP 2 pistol athlon logo Nighthawk Turnbull VIP 2 pistol magazine well Nighthawk Turnbull VIP 2 pistol barrel Nighthawk Turnbull VIP 2 pistol slide Nighthawk Turnbull VIP 2 pistol case Nighthawk Turnbull VIP 2 pistol frame Nighthawk Turnbull VIP 2 pistol rear sight Nighthawk Turnbull VIP 2 pistol holster

There comes a time in most people’s lives when they can sit back and take a deep breath. The kids are done with college, retirement is in sight, there are just a few more mortgage payments, and your spouse is planning that once-in-a-lifetime cruise. You’ve worked hard all of your life, raised a family and put everyone else’s concerns ahead of yours. Now it’s time to do something for yourself.

You’ve always enjoyed shooting and own some nice guns. But do you own something really special? Something of heirloom quality that can be passed down for generations as a reminder of your hard work and love? Would it be a gun that exhibited the same attention to detail and care you used to build your business or profession? Would it endure like your love for your family?

This brings us to Nighthawk Custom and its Turnbull VIP 2. This full-sized, all-steel 1911 features the legendary Doug Turnbull’s color-casehardened frame and a charcoal-blued slide. Parts like the slide stop, thumb safety and magazine release are nitre blued for contrast, and the pistol is fitted with a pair of mammoth ivory grips. To top it off, the front sight bead on this pistol is made of 14-karat gold, and each gun comes with a custom-built case. Because of the time needed to manufacture each VIP 2, they are available in very limited quantities.

This is a gun that, in my estimation, fulfills every criteria to be an immediate heirloom where the owner is but a temporary custodian of what will undoubtedly become a family treasure. I recently had the opportunity to chat with Mark Stone, the owner and CEO of Nighthawk Custom, regarding the Turnbull VIP 2.

Quality Partners

“I’d always admired Doug Turnbull’s work, and about three years ago, I was wandering around the NRA show with Richard Heinie and saw Doug standing by himself and went over and introduced myself to him. We decided to do a collaboration. It’s been a great working relationship and friendship. He has a huge following of loyal customers who appreciate his work, and so has Nighthawk.

“We send him eight to 10 receivers at a time and do all the prep work at our shop. We build a complete pistol—everything is fitted by hand. Each part is fitted exactly to every part it comes in contact with. The gunsmith will actually function-test the gun before it even has sights or a finish on it. Underneath the left grip panel is where the gunsmith will stamp his initials. This is where he says this gun meets the Nighthawk standard as well as my own. From there he’ll put all the bevels on. None of that is done with a tumbling machine. It’s all done by hand. We’ll work on all the radiuses first and then come back and sand all the flats. Then we’ll take sanding sticks and take any file marks out.

“At that point, they are wrapped up and bagged individually because all the parts have to be kept separate, as they are all hand-fitted to each individual gun. Then we’ll send them to Turnbull. He’ll do the casehardening and nitre bluing of the smaller parts like the slide stop, magazine release, thumb safety, and sear and hammer pins. He’ll send the parts back to us and we’ll go through the gun and make sure everything is OK, then we’ll assemble it, test it on target and get it ready to ship.”

Case-Hardened Beauty

The Turnbull casehardening finish on the frame is really a sight to behold. Colors from straw to plum to purple to violet and deep blue can all be seen, adding depth and character to the Tunrbull VIP 2’s frame. It also makes a perfect backdrop for the nitre-blued parts, which contrast beautifully against the casehardening.

The Turnbull VIP 2 has one of the nicest frame-to-slide fits I have ever examined. In battery, there is not an iota of play between the two parts, yet the slide feels as though it is gliding when cycled by hand. I asked Stone how this precise fit was accomplished and if each Nighthawk technician had a specialty. “In the beginning, we did what everyone else did—we had one guy who did the frame-to-slide fit, another who cut the barrel lugs, another for the trigger and safety work, etc.,” Stone said. “But now we have one guy who builds the gun from start to finish. It takes well over 50-percent longer to build it this way, but the end result proves that it’s worth it.

“But, to answer your question, when we machine the frames and slides, you can always remove material, but you can’t put it back on. We’ll bevel the edges of the frame rails and slide rails and see if we can get them to fit, then we’ll mic the slide and the rail dimensions and, depending on how much material has to be removed, either use a sanding block or machine it off. Then we’ll use sanding stones to flatten it back out and then go to a lapping compound, where it actually feels like it’s on ball bearings when you work the slide.”

Additional Details

The frame-to-slide fit isn’t the only impressive part. The beavertail, for example, is so flawlessly fitted to the frame that I doubt a human hair could be wedged between the two parts! Even the single-sided thumb safety disengages with the same crispness as the pistol’s 4-pound trigger. All of the gun’s lines are true; the frame and slide flats are exact, and transitions between the frontstrap and slide top radiuses are precise.

“Taking a gun like the Turnbull VIP 2 to the next level takes about 40 percent more prep work. There’s probably 10 to 12 hour of prep work in that gun! Our barrel has 100-percent contact with the lower lugs, and people don’t understand what that does for the gun and why it’s so expensive. A lot of people don’t see the details required to make a great gun. We’re making a living, but we’re not getting rich building these guns. We try to be lean in everything we do. We do our best to maintain a great name in the industry.”

Functional Art

The Nighthawk Turnbull VIP 2 is a functional work of art. Though much effort has been given to creating a beautiful pistol, Nighthawk doesn’t lose sight of this gun’s mission as a defensive firearm. Its feed ramp and throated barrel are polished mirror bright for feeding. Nighthawk also uses an oversized bushing and deeply crowns the barrel. Gunsmiths also lower and flare the gun’s ejection port. The one-piece magazine well funnel/mainspring housing is flawlessly blended to the frame for fast and easy reloads, and all of the sharp edges have been beveled.

Stone said, “We used a matte blued slide on the Turnbull VIP 2 because it is more forgiving of scratches. This gun could be used for daily carry.” And we can’t forget the mammoth ivory grips. The fact that they were made from the tusks of a now-extinct beast that lived thousands of years ago is mind blowing; they are just two more additions that make the VIP 2 unique.

Stone said, “Three or four years ago, a guy came by our SHOT Show booth with a block of mammoth ivory. I saw him sometime later at another meeting, and he had the grips with him, and, man, were they beautiful! They’re expensive, but every one of them is a little bit different and unique. It’s like picking lumber for the floor in your house because it’s not all the same. You still really don’t know what it will look like until it gets cut. He has a process where he actually puts some material on the back of it to stabilize it more. Some sort of resin material keeps the bone from coming apart and makes it look great. We helped him figure out a way to keep the grips from warping, and we couldn’t be happier.”

Chuck Allen’s Gun

By now you’re probably wondering how the gun shoots, and I wish I could tell you. Based on my experience with other Nighthawk Custom 1911s, I’d be very surprised if this gun couldn’t shoot groups under an inch all day long. But this gun doesn’t belong to me and it is not an ordinary test gun.

This gun was presented to Chuck Allen, the CEO of Athlon Outdoors, our boss and a man who has always put the needs of his employees ahead of his own, at the 2018 SHOT Show. On the left side of the slide, behind the cocking serrations, you’ll see a simple Athlon Outdoors logo. The Nighthawk was commissioned by some of Chuck’s grateful employees and given to him as a token of their respect and gratitude with the hope that this pistol becomes a cherished family heirloom.

Nighthawk Turnbull VIP 2 Specs

Caliber: .45 ACP
Barrel: 5 inches
OA Length: 8.66 inches
Weight: 37.4 ounces (empty)
Grips: Mammoth ivory
Sights: Gold bead front, Heinie SlantPro rear
Action: SA
Finish: Blued, casehardened
Capacity: 8+1
MSRP: $7,195

For more information, visit nighthawkcustom.com.

This article was originally published in “Combat Handguns” July/August 2018. To order a copy and subscribe, visit outdoorgroupstore.com.

The post Nighthawk Turnbull VIP 2: A $7K Pistol Worth Every Penny appeared first on Personal Defense World.

Auto-Ordnance Reveals New 9mm 1911 Handgun

$
0
0
auto-ordnance 9mm 1911 handgun right profile auto-ordnance 9mm 1911 handgun left profile auto-ordnance 9mm 1911 handgun slide

Auto-Ordnance, a Kahr Firearms Group brand that makes 1911s, M1 carbines and Chicago Typewriters, has announced the first availability of a 1911 pistol chambered in 9mm.

Auto-Ordnance’s 9mm 1911

Developed in response to customer demand, the 9mm 1911 sports that classic GI Model 1911 look. It features brown checkered plastic grips; a five-inch barrel; and a nine-round magazine. In addition, the gun comes with a low-profile blade front sight and a rear sight that’s drift adjustable for windage. It also has a thumb safety, grip safety and firing pin block.

Boasting a matte black finished frame, barrel and slide, this 9mm 1911 sports a carbon steel slide, sear and disconnector machined from solid bar stock. Those parts are then heat treated to ensure the gun keeps running “over many thousands of rounds,” the company asserts.

The pistol tips the scales at 38.4 ounces and measures 8.5 inches in overall length.

“The 1911 pistol is the iconic American Military handgun, serving members of the United States Armed Forces for over 100 years. Its dependability and stopping power are legendary, in no small measure demonstrated by the fact that many shooters today select it as their primary form of self defense,” the press release says. “Auto-Ordnance furthers that tradition of excellence by offering GI model guns based on the original military model 1911s. Auto-Ordnance 1911s are manufactured using modern equipment to exacting engineering standards, and are equipped with the best barrels available to ensure both superb reliability and accuracy. These pistols provide shooters with an opportunity to own and shoot one of the most legendary firearms of America’s military history.”

The Auto-Ordnance 9mm 1911 is available at a MSRP of $673.

For more, check out auto-ordnance.com.

The post Auto-Ordnance Reveals New 9mm 1911 Handgun appeared first on Personal Defense World.

Gun Review: Quarter Circle 10’s QC10 GLF .45 ACP AR Pistol

$
0
0
Quarter Circle 10 QC10 GLF ar pistol beauty Quarter Circle 10 QC10 GLF ar pistol right profile Quarter Circle 10 QC10 GLF ar pistol case Quarter Circle 10 QC10 GLF ar pistol barrel Quarter Circle 10 QC10 GLF ar pistol magazine well Quarter Circle 10 QC10 GLF ar pistol rail Quarter Circle 10 QC10 GLF ar pistol shooting Quarter Circle 10 QC10 GLF ar pistol ammo Quarter Circle 10 QC10 GLF ar pistol trigger Quarter Circle 10 QC10 GLF ar pistol stock

Pistol-caliber ARs have really taken off in the past few years, and it seems like almost everyone that makes an AR is jumping into the game. Until recently, most of those have been chambered in 9mm.

Although this might seem like a new trend, some folks have been doing this for a long time. In fact, Quarter Circle 10 has been putting out dedicated pistol-caliber AR uppers and lowers in a variety of calibers since 2011. If you don’t want to build your own pistol-caliber AR, though, you’re in luck, because Quarter Circle 10 is making complete pistols and carbines, and I recently got my hands on the company’s QC10 GLF in .45 ACP.

Born In Texas

There’s nothing more Texan than cattle and firearms, and that’s the root of the Quarter Circle 10 name. No, it might not roll off the tongue, but this Texas-based company’s name can be traced back to a cattle ranch established back in 1854. That’s a lot of deep history, and it provides quite a legacy for the current company to live up to.

Quarter Circle 10 describes itself as a specialty weapons manufacturer of pistol- caliber carbine products. Its motto is “Made for, not modified,” which reflects the fact that it has been making parts dedicated to pistol-caliber ARs from the beginning rather than modifying rifle-platform AR receivers to take pistol-caliber magazines.

The company is headquartered in Texas, but its lower receivers are made in Tucson, Arizona, and other components are also American-made. The uppers and lowers are constructed from milled billets of 7075-T6 aluminum and treated with a black Type III hardcoat anodizing. The lowers are assembled using mil-spec lower parts kits and fitted with buffer assemblies designed and tested for pistol-caliber guns. For the QC10 GLF, the company adds an SB Tactical SOB brace as well as a basic A2-style pistol grip to the lower.

Quarter Circle 10 makes several styles of lowers to accommodate smaller-framed Glock magazines for 9mm, .40 S&W and .357 SIG guns; a large-frame Glock lower (like that tested) to accommodate the .45 ACP and 10mm; and lowers built around 9mm Colt and HK MP5 magazines. Models that will take Smith & Wesson M&P and Sig Sauer P229/P226 mags are also in the works. The lowers have clean lines with minimal stampings, with the manufacturing information and serial number on the right side and selector markings on both sides.

A Closer Look

The pistol operates via blowback, and the upper receiver’s walls are thicker than a standard rifle-caliber AR’s for increased rigidity and strength. You’ll also notice a widened ejection port for large-caliber pistol cases like the .45 ACP. My QC10 GLF pistol came with a 5.5-inch barrel capped with an A2-style flash suppressor, although a 7.5-inch barrel is also available. It’s surrounded by a 5-inch, free-floating KeyMod handguard that has QD sling mounting points on both sides. It also uses a dedicated .45 ACP bolt carrier group and a BCM Gunfighter extended charging handle. The pistol ships with a soft case that holds the pistol broken down into its upper and lower components, and one 13-round Glock magazine.

The QC10 GLF pistol retails for $1,646, which is a touch more than several other pistol-caliber ARs, but you’re getting a gun built from the ground up for the .45 ACP with no modified rifle parts, mag well adapters or anything similar. The gun is as trim and compact as can be while still having full AR capabilities, like the bolt locking back after the last round is fired, which you don’t always see on cheaper guns. About the only things I might like to see offered are a hand stop, especially with the short 5.5-inch barrel, and a single-point sling adapter. You can easily add both as aftermarket parts.

Range Setup

I hit the range with my buddy, Jim, on a cool, partly cloudy, 65-degree summer day. My range bag was stocked with .45 ACP ammunition of various weights and bullet styles, plus my Huntertown Arms Guardian 45 suppressor and LabRadar chronograph. I outfitted the QC10 GLF with a Holosun 510C reflex sight, which is a great choice for a pistol-caliber carbine or AR pistol. Its ring-and-dot reticle is fast to pick up yet precise enough for fine accuracy. It’s solar powered with a battery backup and is designed to be left on so it’s always ready when you need it. To feed the beast, so to speak, I had a mix of 13-round Glock magazines as well as 13- and 26-round SMG Tactical magazines.

Shooting the QC10 GLF is downright pleasant. The overall size of the pistol, coupled with the AR buffer, made for a platform that barely moved when fired. Add the BATFE’s clarification last year that it’s again OK to shoot your braced pistol from the shoulder provided you don’t modify the brace from its factory configuration, and you have an extremely controllable package.

After Action Report

The pistol’s reliability was very good overall, particularly with standard-weight .45 ammo. In fact, there were no stoppages with the 165- to 230-grain loads. We did have a few failures to eject using the PolyCase Inceptor ARX load initially, although those seemed to clear up during subsequent runs. These 118-grain bullets made it out of the 5.5-inch barrel at a little over 1,400 fps, and they cycle the gun’s blowback system much faster than it was probably designed for. The recoil and report were not unpleasant with both PolyCase loads, but they were more significant than with the heavier .45 ACP loads.

The QC10 GLF’s accuracy was excellent. Quarter Circle 10 is doing everything right with this build, as most loads were printing at about 1 inch at 25 yards, with even the basic Federal American Eagle 230-grain FMJs printing at less than an inch. The QC10 GLF didn’t care for the high-velocity polymer RNPs as much, but even those were still averaging less than 3 inches. Oddly, though, the even-lighter ARX load brought some phenomenal sub-1-inch, one-ragged-hole groups—the best groups of all of the loads from multiple shooting sessions. The Holosun 510C also proved to be a great match for the pistol, as it allowed for fast, accurate fire when putting rounds on target quickly or while moving but was still capable of providing precise hits from the bench or a stable standing position.

Covert Ops

Bear with me for a minute. The British De Lisle carbine was one of the more fascinating weapons of World War II. It was a modified Enfield bolt-action rifle chambered in .45 ACP that accepted 1911 magazines and incorporated a rather massive integral silencer. It was an extremely effective piece that was used in clandestine operations. I’ve always thought a suppressed .45 ACP carbine that accepted pistol magazines was a great idea, and although my test gun isn’t a carbine, the AR-based QC10 GLF makes for a modern take on that concept. I mated it with my Huntertown Arms Guardian 45 suppressor to cobble together my own 21st century De Lisle.

Huntertown Arms isn’t doing a fixed-barrel adapter for the Guardian 45 as of this writing. In fact, we recently learned that due to the current softness in the suppressor market, Huntertown Arms is ceasing operations for now. That said, I had Josh Rowe of Allegheny Arms and Gun Works whip me up one for use in this article. Josh’s work is meticulous, and his adapter dropped in and had me shooting the QC10 GLF in no time. I used the heaver 230-grain bullets with the suppressor because they were subsonic.

The pistol’s performance and reliability were still 100-percent suppressed, although I saw a noticeable drop in my point of impact when I added the can. And though the Guardian 45 reduced the report of the pistol, we weren’t talking movie quiet. The big .45 made a fairly loud cough, but it was still substantially quieter than unsuppressed, and it was pleasant to shoot without hearing protection.

Final Thoughts

All told, if you’re looking for a quality pistol-caliber AR carbine or pistol, it’s difficult to go wrong with a Quarter Circle 10 product. Despite the current market explosion of pistol-caliber weapons, this company has been turning out quality products for years and has refined the art. The QC10 GLF offers top-quality components and features not found on some bargain pistol-caliber ARs. Although I tested the big-bore .45 ACP, Quarter Circle 10 can pretty much accommodate any common defense caliber and in a good variety of magazine configurations.

Quarter Circle 10 QC10 GLF Specs

Caliber: .45 ACP
Barrel: 5.5 inches
OA Length: 23.5 inches
Weight: 5.17 pounds (empty)
Grips: Polymer
Sights: None
Action: Blowback-operated semi-auto
Finish: Matte black
Capacity: 13+1
MSRP: $1,646

Quarter Circle 10 QC10 GLF Performance 

Load Velocity Accuracy
Federal 165 Guard Dog 1,108 1.50
Federal 230 HST 932 1.81
Federal American Eagle 230 FMJ 865 0.81
Federal American Eagle 230 Syntech 841 1.25
PolyCase 118 ARX 1,421 0.75
PolyCase 130 RNP 1,313 2.50

*Bullet weight measured in grains, velocity in fps by chronograph and accuracy in inches for best five-shot groups at 25 yards.

For more information, visit quartercircle10.com.

This article was originally published in “Combat Handguns” July/August 2018. To order a copy and subscribe, visit outdoorgroupstore.com.

The post Gun Review: Quarter Circle 10’s QC10 GLF .45 ACP AR Pistol appeared first on Personal Defense World.

VIDEO: The Colt Competition 1911 9mm Lives Up to the Colt Name

$
0
0

It goes without saying that Colt is one of the most iconic manufacturers in the firearms industry. From the Model 1873 Single Action Army to the M1911 and the M16, the company has undoubtedly had a significant impact on American gun development. But how do its modern firearms hold up? To answer that question, our buddy Graham Baates recently got his hands on a Colt Competition 1911 in 9mm. Recognizing that a 9mm 1911 also brings with it the added question of reliability, Graham went to work.

Graham started off with a full mag +1 basic reliability test from about 17 yards out. He followed it up with a magazine compatibility test, using four non-Colt mags by Mefalform, Zenith, Mec-Gar and Springfield, each filled with three rounds of 115gr Freedom Munitions ball ammo. After that came the “What’s for Dinner?” test, where Graham uses Freedom Munitions’ Hush 165gr subsonic ammo; Remington HTP 147gr JHP; Hornady Steel Match 125gr; Hornady American Gunner 115gr XTP; Fiocchi 100gr 9SFNT; Geco 94gr; and Liberty Civil Trainer 65gr. Lastly, Graham conducts a field accuracy test, shooting five rounds from seven yards out using Nosler Match Grade 124gr ammo.

Watch the video above to see the results. See the specs for the Colt Competition 1911 below.

For more on Colt, visit Colt.com.

Colt Competition 1911 Specs

  • Action: Single Action Hammer Fired Semi-Auto
  • Barrel: 5″
  • Capacity: 9+1
  • Finish: Stainless
  • Sights: Novak Adjustable Fiber Optic
  • Stock: Steel Frame / G10 Checkered Blue Grips Grips
  • Magazine: 2 / 9 rd.
  • Weight: 36 oz.
  • Safety: Thumb Safety, Grip Safety
  • Grips: G10 Blue and Black Grips
  • Barrel Length: 5″
  • Overall Length: 8.5″
  • Features: National Match Barrel/ Dual Recoil Spring System

Graham Baates” is a pen name used by a 15-year active U.S. Army veteran who spent most of his time in the tactical side of the Intelligence community including tours in Afghanistan and Iraq. Post-Army, Graham spent some time in the 3-Gun circuit before becoming a full-time NRA Certified defensive handgun instructor and now works as an industry writer while curating a YouTube channel on the side.

The post VIDEO: The Colt Competition 1911 9mm Lives Up to the Colt Name appeared first on Personal Defense World.

VIDEO: Hitting at 180 Yards with the 10mm Ruger Super Redhawk Revolver

$
0
0

The following snippet on the Ruger Super Redhawk is from the September/October 2018 issue of Combat Handguns Magazine, on sale July 3, 2018. To subscribe, please visit OutdoorGroupStore.com. Story by Paul Scarlata; video by Sean Utley.

The 10mm Ruger Super Redhawk is a member of a small but distinctive community: Revolvers chambered for pistol cartridges. The first were the M1917 revolvers used by the U.S. Army during World War I, which used a pair of stamped-steel half-moon clips, each holding three .45 ACP cartridges, that allowed the extractor to eject the casings.

With the burgeoning popularity of action pistol shooting in the 1970s, the full-moon clip was developed. It held six cartridges, allowing rapid reloads for shooters (including me) using .45 ACP revolvers in competition.

I’m sure some of you wonder why Ruger would chamber a revolver for the 10mm when there are so many excellent revolver cartridges. But pistol cartridges provide several advantages for wheelgun shooters, the first of which is reloading speed.

Pistol cartridges generally have shorter overall lengths than magnum revolver cartridges. When connected together on a full-moon clip, they can be dropped into a revolver cylinder quickly and ejected faster than the longer cartridges traditionally used in revolvers. Another advantage is that the full-moon clip holds the spent cases together for reliable extraction and ejection, and a stray case cannot slip under the revolver’s extractor, jamming up the works.

As for cost, a perusal of websites shows that 10mm ammunition is cheaper than most .44 Magnum, .454 Casull and .480 Ruger rounds. Lastly—and this is of interest to reloaders—spent brass is easy to find and pick up.

So there you have it. The new Super Redhawk is chambered for a cartridge capable of taking large game with the advantages of more reliable ejection and faster reloading. What’s not to like?

To read the rest of this article on the Super Redhawk, pick up a copy of the September/October 2018 issue of Combat Handguns Magazine. Copies are available at OutdoorGroupStore.com.

For even more information, please visit Ruger.com.

Ruger Super Redhawk Specifications

  • Caliber: 10mm
  • Barrel: 6.5 inches
  • OA Length: 12 inches
  • Weight: 54 ounces (empty)
  • Grips: Cushioned rubber
  • Sights: Ramp front, adjustable rear
  • Action: DA/SA
  • Finish: Satin stainless
  • Capacity: 6
  • MSRP: $1,159

The post VIDEO: Hitting at 180 Yards with the 10mm Ruger Super Redhawk Revolver appeared first on Personal Defense World.

Sexy Supergrade: Roberts Defense SuperGrade 2-Tone (Giveaway)

$
0
0
Roberts Defense SuperGrade 2-Tone pistol beauty Roberts Defense SuperGrade 2-Tone pistol muzzle Roberts Defense SuperGrade 2-Tone pistol ejection port Roberts Defense SuperGrade 2-Tone pistol rear sight Roberts Defense SuperGrade 2-Tone pistol front sight Roberts Defense SuperGrade 2-Tone pistol barrel Roberts Defense SuperGrade 2-Tone pistol disassembled Roberts Defense SuperGrade 2-Tone pistol safety trigger grips Roberts Defense SuperGrade 2-Tone pistol target

Is there anything sexier than a hand-fitted, American-made 1911? Well, yes. Jessica Rabbit, for example. I know it’s a cartoon, but seriously. And don’t judge me too harshly; that movie came at an impressionable time in my youth. But as far as pistols are concerned, I am going to have to say no. The folks at Roberts Defense up in Oshkosh, Wisconsin, are absolutely doing it right. Yes, sir: 1911s and cheese curds. I love that state.

The classic look of the 4.25-inch-barreled SuperGrade 2-Tone in .45 ACP just does it for me. Not to mention that it’s stuffed with match-grade components, Heinie SlantPro tritium sights and black Cerakoted hardware. The checkering on the grip panels, frontstrap and backstrap is sharp and offers great control, but it isn’t so pronounced that these surfaces will turn into flesh graters after a full day at the range.

The true Videki-designed trigger has a snappy 3.5- to 4-pound pull weight with a tight reset. Combined with the hand-polished feed ramp and aforementioned Heinie sights, you get a super-reliable platform that is as pleasurable to shoot as it is accurate. I have never felt that I am great at testing a weapon’s accuracy from a benchrest, yet I was able to keep my groups in the 1.25-inch range with this pistol.

Another aspect of what Roberts Defense does that I like: Aside from the logo at the rear, the company keeps its slides unmarked. The lack of a name or model designation milled into the sides maintains the clean, sharp-looking Cerakote finish.

Do you want this gun? Of course you do. And the best part about it being a giveaway is that you don’t have to justify it to anyone with whom you share a checking account. All you need is a little room in your safe and a little room in your heart.

To enter the sweepstakes, visit PersonalDefenseWorld.com/roberts1911, and for more on the gun itself, visit RobertsDefense.com.

This article is from the September/October 2018 issue of Combat Handguns Magazine. To subscribe, please visit OutdoorGroupStore.com.

Roberts Defense SuperGrade 2-Tone Specs

Caliber: .45 ACP
Barrel: 4.25 inches
OA Length: 8 inches
Weight: 36 ounces (empty)
Grips: VZ G10
Sights: Heinie SlantPro tritium
Action: SA
Finish:Cerakote, stainless
Capacity: 8+1
MSRP: $2,390

The post Sexy Supergrade: Roberts Defense SuperGrade 2-Tone (Giveaway) appeared first on Personal Defense World.

Subcompact Standoff: Walther PPQ SC vs. Sig Sauer P365

$
0
0
sig p365 walther ppq sc pistols sig p365 walther ppq sc pistol right profile sig p365 walther ppq sc pistol slide sig p365 walther ppq sc pistol rear sight sig p365 walther ppq sc pistol test sig p365 walther ppq sc pistol shooting sig p365 pistol left profile sig p365 pistol slide sig p365 pistol rear sight sig p365 pistol recoil sig p365 pistol target sig p365 pistol holster

Subcompact pistols seem to be all the rage right now as both manufacturers and individuals work to find better solutions for everyday concealed-carry needs. While there are some who don’t mind the extra weight and bulk of compact or full-sized pistols for concealed carry, most folks are looking for a better compromise when it comes to size, capacity and performance.

Recognizing that fact, many firearms companies have been introducing a plethora of pistols during the past few years to fill that void. Among those are Walther Arms and Sig Sauer. Both companies have recently released pistols for the concealed-carry market in a bid to capture a share of this growing market.

Walther’s entry is the new PPQ SC, which is modeled after the company’s popular PPQ M2 series, and Sig’s release is the newly designed P365. Both pistols are similar in that they are polymer-framed, striker-fired pistols with standard capacities of 10+1 rounds. But while these guns share similar materials and operating systems, there are plenty of other differences that separate them and make each one a contender in its own right.

Walther’s Warrior

Taking the PPQ SC in hand, there’s no questioning the origins of its DNA. It is essentially an abbreviated version of the PPQ M2. It has the same ergonomics with its molded grip, and it sports an American-style magazine release. The PPQ SC also incorporates the same excellent trigger system found in its older sibling. The sample I received for this review had a clean trigger break at just 4.2 pounds, though it also had a good amount of take-up. And it also had a very short reset (0.1 inches according to Walther), which allows for faster follow-up shots.

Cocking serrations adorn both the front and the rear of the slide, and the frame includes an oversized triggerguard that facilitates the pistol’s use with gloved hands. The PPQ SC measures 6.6 inches long, 1.3 inches wide, 4.4 inches high and weighs in at 21.2 ounces unloaded. The grip has some texturing around its circumference, though it is very subtle.

Left-handed shooters will appreciate the ambidextrous slide release as well as the reversible magazine release. The PPQ SC also comes with basic three-white-dot sights made of polymer rather than steel. However, Walther does offer an optional set of night sights for those who are willing to invest a bit more in their carry tool of choice.

The standard magazine capacity for the PPQ SC is 10 rounds, though Walther includes an extended 15-round magazine with an integral sleeve in the box. Other notable features include a corrosion-resistant Tenifer slide finish and a Picatinny rail for the addition of accessories such as lights or lasers. To complement its already excellent ergonomics, the PPQ SC also comes with interchangeable backstraps so shooters can find the perfect fit.

Sig’s Micro Shooter

The P365 sprang from out of nowhere and took the marketplace by surprise. Purpose-built from the ground up, the P365 is actually dubbed a “micro-compact” by Sig Sauer. But, lest the size category fool you, it’s worthy of a close look to see what it actually has to offer.

The standout feature of the P365, especially considering its size, is the 10-round magazine capacity. This pocket- worthy pistol has an overall length of 5.6 inches, a height of 4.3 inches and a width of just 1 inch. The weight of the Sig P365 is also just a scant 17.8 ounces. There were definitely at least a couple of Sig engineers burning the midnight oil to pack a flush-fitting, 10-round magazine into a package this small.

The grip is a one-size-fits-most design, as there are no interchangeable backstraps to adjust for user hand size. The Sig Sauer P365 also includes front and rear cocking serrations, and the frame has a proprietary rail for accessories, though I think that defeats the purpose of having a pistol this size.

Lefties may not be quite as fond of the P365 since the slide release is not ambidextrous, but it does include a reversible magazine release. Additionally, the P365 is also available with an optional ambidextrous thumb safety. This is a plus for those folks who are a little wary of most striker-fired pistols.

Like most of Sig’s other pistols, the P365 comes with a stainless slide sporting a black Nitron finish. The gun comes with two 10-round magazines—one flush-fitting and one with a slightly extended basepad with a finger rest. For even more capacity, Sig Sauer also offers an optional 12-rounder to satisfy the firepower fanatics, including myself.

Originally, the P365 was slated to ship with SIGLITE night sights, but now it ships with the company’s excellent X-RAY3 day/night sights.

Head To Head

When it comes to build type, operating system, feature set and magazine capacity, the PPQ SC and the P365 are pretty much on par with each other. The main objective difference between the two is size. The Walther is not only taller and longer, but it is also 30-percent wider as well. This isn’t necessarily a bad thing, but given that the P365 houses the same number of rounds in a much smaller package, it’s hard to justify dealing with the extra bulk and weight of the PPQ SC.

The Walther’s famous trigger lived up to its name on the range, as it is certainly one of the best triggers I’ve used on a striker-fired pistol, though the Sig’s trigger pull was very close. There was more take-up with the Walther, and it had a bit of a gritty sensation. The P365’s trigger pull was shorter and crisper than the Walther’s but was a slight bit heavier.

The practical accuracy between the two was essentially identical. I fired both from 7 and 10 yards, and each easily printed groups tighter than 2 inches off-hand. I will say that from a tactical standpoint, I thought the bright green X-RAY3 sights on the P365 were quicker to pick up and align than those on the Walther. The Walther’s sights were narrower, and the dots were smaller.

During the testing, the PPQ SC experienced one stovepipe malfunction, and that happened very early on in the shooting. It may have been a break-in issue, as it did not happen again. The P365 had no malfunctions, though because of its size and the position of the slide stop, I noticed that the side of my weak-hand thumb pushed the slide stop up a couple of times during recoil, causing the slide to lock back. I had to adjust my grip slightly to ensure this didn’t happen going forward.

Verdict

Both the P365 and the PPQ SC offer a lot in terms of features and quality. The selection process will come down to certain preferences or priorities like the feel of the trigger, concealability or even perceived value. The MSRP for the PPQ SC is $649 while that of the P365 is $600. They are fairly close in price, but the devil is in the details as far as what each one brings to the table. As always, it boils down to the little subjective things and what’s most important to the user. But, either way, both of these modern fighting pistols will serve you well.

Walther PPQ SC vs. Sig Sauer P365

Manufacturer Walther PPQ SC Sig Sauer P365
Caliber 9mm 9mm
Barrel 3.5 inches 3.1 inches
OA Length 6.6 inches 5.8 inches
Weight 21.2 ounces (empty) 17.8 ounces (empty)
Grip Polymer Polymer
Sights Three-dot X-RAY3 day/night
Action Striker-fired Striker-fired
Finish Matte black Matte black
Capacity 10+1, 15+1 10+1
MSRP $649 $600

For More Information

Walther
waltherarms.com

Sig Sauer
sigsauer.com

This article was originally published in “Combat Handguns” July/August 2018. To order a copy and subscribe, visit outdoorgroupstore.com.

The post Subcompact Standoff: Walther PPQ SC vs. Sig Sauer P365 appeared first on Personal Defense World.


Ruger Releases New SR1911, Security-9, 10/22 and 77/17 Models

$
0
0
ruger sr1911 security-9 10/22 77/17 pistols rifles Ruger SR1911 officer pistol right profile Ruger security-9 pistol left profile Ruger 10/22 Target Lite rifle right profile Ruger 77/17 rifle right profile Ruger 77/17 rifle left profile

Ruger has announced the release of four new guns: the SR1911 Officer-Style in .45 ACP; Security-9 pistol equipped with a Viridian E-Series red laser; 10/22 Target Lite rifle with a red and black laminate stock; and a 77/17 in .17 WSM with a green mountain laminate stock. Here’s the quick breakdown, via the press release on each new model:

SR1911 Officer-Style .45 ACP

The new SR1911 Officer-Style pistol chambered in .45 Auto features a shorter, 3.60″ barrel and shortened grip frame that makes for an ideal concealment pistol. Compared to the SR1911 Lightweight Officer-Style, the steel frame on this new model retains additional weight for better balance, lower recoil and greater durability.

Security-9 With Viridian E-Series Red Laser

The reliable and affordable Security-9 is now available paired with a factory-installed Viridian E-Series red (635-650 nm) laser. The adjustable laser module weighs just over 1/2 ounce with the installed long-lasting battery and comes securely mounted to the pistol. The laser also features ambidextrous push-button activation. This low-cost option is ideal for increasing accuracy in low light conditions.

10/22 Target Lite Red And Black

The new 10/22 Target Lite is a top of the line offering from Ruger. Featuring the BX-Trigger with a light, crisp 2.5-3 pound trigger pull weight and a cold hammer-forged barrel tensioned in an aluminum alloy barrel sleeve, this new configuration is paired with a red and black laminate thumbhole stock, and should appeal to shooters looking for performance, reliability and style.

77/17 .17 WSM Green Mountain

Following on the heels of the successful reintroduction of the 77-Series bolt-action rifles, Ruger now offers the Ruger 77/17 chambered in .17 WSM with an 18.50″ stainless steel barrel and Green Mountain laminate stock. Flat-shooting and superbly accurate, this rifle also features an improved trigger pull over previous 77/17 WSM models.

For more on these guns, head on over to Ruger.com.

The post Ruger Releases New SR1911, Security-9, 10/22 and 77/17 Models appeared first on Personal Defense World.

Gun Review: The Customized Wilson Combat Glock 19 Gen4

$
0
0
Wilson Combat Glock 19 Gen4 pistol beauty Wilson Combat Glock 19 Gen4 pistol front sight Wilson Combat Glock 19 Gen4 pistol trigger Wilson Combat Glock 19 Gen4 pistol slide Wilson Combat Glock 19 Gen4 pistol muzzle Wilson Combat Glock 19 Gen4 pistol shooting Wilson Combat Glock 19 Gen4 pistol left profile Wilson Combat Glock 19 Gen4 pistol closeup Wilson Combat Glock 19 Gen4 pistol barrel Wilson Combat Glock 19 Gen4 pistol ammo Wilson Combat Glock 19 Gen4 pistol target Wilson Combat Glock 19 Gen4 pistol right angle

For over 40 years, Wilson Combat has been the leader in custom 1911 pistols and parts. Over the years, the company has also branched out to other areas that Bill Wilson had an interest in, such as AR-platform rifles in 14 different calibers, including Wilson’s proprietary 7.62×40 WT. A few years ago, Bill’s interest in the Berretta 92 led to Wilson Combat offering a line of enhanced and customized 92s like the Brigadier and Centurion. However, Bill had very little interest in doing any work on Glock pistols. In fact, he actively resisted working on Glocks—until now, that is. Bill recognized that a large percentage of shooters own Glocks. There are also those Glock shooters who want to enhance their pistols in a tasteful manner.

As with other projects, Wilson did not enter this one half-hearted. A lot of research went into what modifications were popular and would fit with the Wilson Combat philosophy. There would be not be any holes cut in the slide or compensators. The Wilson Combat Glocks had to be tastefully functional and practical. The next challenge was making the work affordable while ensuring the quality was up to Bill’s standards. The decision was to automate as much of the work as possible. This required building fixtures, writing code and programing lasers. Only when everything was in place, and met Bill’s approval, did Wilson Combat open its shop for Glocks. The end result is an a la carte build sheet that gives customers some 88 options.

Last year, I had the opportunity to visit Bill at his ranch in Texas. He was kind enough to give me a guided tour of his vault. One of the things he showed me was a prototype of a Glock 19. I decided, then and there, that I would get one of my own Glocks to Wilson’s Berryville, Arkansas, plant as soon as I could. In recent years, my daily-carry pistol has been a Glock 19 Gen4. With the exception of 10-8 Performance sights, the pistol was kept exceptionally stock. I also had a second G19 Gen4 set up as a spare. I decided to send this backup G19 to Wilson to work its magic.

The Work Begins

I knew I wanted the pistol to reflect Wilson Combat’s quality, aesthetics and performance. My build sheet was not all inclusive but included the most popular options for a personal-defense/carry pistol. I also added a few cosmetic options.

The slide received the most extensive work. Wilson added seven forward cocking serrations that were exact replications of the factory rear cocking serrations. The serrations on the left side of the slide are cut around the original Glock markings. The end of the slide was radiused in a manner similar to the new Gen5 models. The top of the slide was machined with 28-lpi serrations from the front sight to just in front of the rear sight. The Wilson eagle logo was also etched on the top of the slide here.

While reliable ejection has never been an issue with any Glock pistol that I’ve owned, I went ahead and had Wilson Combat lower and flare the ejection port. The sights were replaced with a tritium front sight and one of Wilson’s U-notch rear Battlesights.

The company also wanted me to evaluate one of its fitted match barrels, so that was added to the build sheet. I opted to have the muzzle finished with a deep reverse crown and flutes machined along the exterior. I also requested a second barrel that was threaded for a suppressor. Finally, the slide was finished in gray Armor-Tuff.

Wilson’s signature 1911 grip panels have featured a Starburst pattern for several years, and the company reproduced the same pattern on the grip of the Glock. The work is done with a laser and is very clean and consistent. I selected to omit having the thumb pad stippled but did have the base of the triggerguard cut high. Wilson also upgraded the fire controls with Apex’s excellent Glock Action Enhancement Kit, which included a new trigger bar and machined aluminum trigger. The new trigger broke cleanly and weighed 5.25 pounds on average.

Apex Predator

On the range, the flat face of the Apex trigger allowed me to position my trigger finger more consistently and immediately solved my problem of pushing shots to the left. The Starbust grip stippling provided more traction than the factory texturing. This was especially noticeable when running “Bill Drills” and other rapid-fire strings.

Formal testing consisted of shooting the custom G19 with three of Wilson’s premium personal-defense loads. I started with the 95-grain copper TAC-XP load that is optimized for compact pistols. Despite averaging 1,273 fps, this load was soft shooting and is ideal when over-penetration is a concern. The next load, 115-grain +P TAC-XPs, is my favorite, and I normally load it in my daily-carry guns. Here it averaged 1,092 fps. Finally, the 124-grain +P XTP HPs averaged 1,163 fps. All three loads produced five-shot groups well under 2 inches. I had several three-shot groups that were well under an inch before I ruined things with a flyer. Needless to say, the Wilson Custom G19 is more accurate than I am.

Next, I ran my standard drills with the G19. The Hackathorn “10-10-10” drill is deceptively difficult. It calls for starting at a ready position and engaging an NRA 25-yard bullseye target from 10 yards with 10 shots in 10 seconds. The challenge is to remember the fundamentals and not let the clock beat you. My best run was a 96 with four shots in the X-ring. The shot I pulled into the 8-ring really aggravated me!

Hitting a reduced-size IPSC steel silhouette from 50 yards proved to be rather boring. So I moved up to 25 yards and concentrated on headshots. While that proved more challenging, if wasn’t difficult when I stayed on the front sight and focused on trigger control. I’m not sure if my increased accuracy is due to the trigger or the match barrel. In any case, my performance with the pistol was significantly better than with a stock G19.

I also ran the G19 with Sig Sauer’s excellent SRD9 suppressor using Super Vel’s 147-grain Hush Puppy ammunition. This ammo averaged just over 900 fps and, even with the SRD9 suppressor, proved 100-percent reliable. This proved to be a lot of fun, especially when ringing steel. While the Wilson Battlesight did not clear the suppressor, I was able to make solid hits by shooting with both eyes open and superimposing the sight on the target.

Daily Carry

After an initial range trip, I shelved my stock G19 and the Wilson custom became my everyday-carry pistol. Recently, the rig that gets the most use is Raven Concealment’s Hackathorn Signature Series holster. The rig is only available for Ken Hackathorn’s “go-to” handguns: the G17, G19, 1911 and HK VP9. The holster’s shape is similar to a leather holster and lacks the square profile of many Kydex rigs. At Ken’s request, the standard OWB belt loops have been replaced with 1.5-inch drop loops. A double magazine pouch with the same belt loop configuration rounds out the set. The set is in limited production and will set you back around $150.

Raven recently announced that it was transitioning to an injection-molded line of holsters called the Perun. The Perun is now the company’s flagship OWB holster and is designed for maximum concealment. This is accomplished by the modular belt loops adding to the curvature of the holster. In addition, the holster is fully ambidextrous and can be set up with a 0- or 10-degree cant. It is also compatible with slide-mounted reflex sights. With a retail price of $40, I plan on ordering several.

So, after 60 or so days of carrying the Wilson Combat G19, and close to 500 rounds downrange, I have come to a few conclusions. First, the Starburst stippling works well without being overly aggressive for concealed carry. I have also come to like the contour of the Wilson rear sight and its U-notch. This is the first Glock I have owned with forward cocking serrations. I now find myself wanting them on my other carry Glocks. They really do make a difference. As previously noted, the Apex trigger has improved the consistency of my trigger placement, thus improving my accuracy. Also, after several hundred presentations from the Raven holster, there are no significant wear marks on the slide. Finally, the gray slide over the black frame is very attractive.

A Cut Above

Some of the popular Glock shops still do stippling and other work by hand. This can result in inconsistent quality and be expensive. I found that Wilson’s modifications are extremely reasonable. For example, the Starburst frame treatment is $139 while the cocking serrations and slide serrations are only $75 each. The gray Armor-Tuff finish for the slide was $100, but for those who would like to have the entire pistol refinished, the cost is $350. This is considerably less than some other shops.

And there is more good news, Wilson Combat is now accepting work on the 9mm Glock 43. Mine went out yesterday. No one has ever accused Bill Wilson of half-stepping anything, and he certainly has a winner with his Glock customization packages, even if he doesn’t personally like the gun! If you’re interested, visit the Wilson Combat website, click on “Custom Work & Finishes” and then select “Glock Customization.” Then a PDF build sheet will load, showing all the options that are available. You’ll be glad you did!

Wilson Combat Glock 19 Gen4 Specs

Caliber: 9mm
Barrel: 4.01 inches
OA Length: 7.28 inches
Weight: 23.65 ounces (empty)
Grip: Polymer
Sights:Tritium front, Battlesight rear
Action: Safe Action
Finish: Armor-Tuff
Capacity: 15+1
MSRP: N/A

Wilson Combat Glock 19 Gen4 Performance 

Load Velocity Accuracy
Wilson Combat 95 TAC-XP 1,273 1.25
Wilson Combat 115 TAC-XP +P 1,092 1.50
Wilson Combat 124 XTP HP +P 1,163 1.75

*Bullet weight measured in grains, velocity in fps by chronograph and accuracy in inches for best five-shot groups at 15 yards.

For More Information

WilsonCombat
wilsoncombat.com

Glock
glock.com

Raven Concealment Systems
rcsgear.com

This article was originally published in “Concealed Carry Handguns” 2018 #211. To order a copy and subscribe, visit outdoorgroupstore.com.

The post Gun Review: The Customized Wilson Combat Glock 19 Gen4 appeared first on Personal Defense World.

New Handgun: The 2018 Ed Brown Classic Custom 1911

$
0
0
Ed Brown Classic Custom 1911 pistol beauty Ed Brown Classic Custom 1911 pistol left angle Ed Brown Classic Custom 1911 pistol slide top Ed Brown Classic Custom 1911 pistol mainspring Ed Brown Classic Custom 1911 pistol muzzle

Ed Brown has revealed the 2018 edition of the Classic Custom, the flagship firearm in its Exhibition series of 1911s.

Available in stainless and blued versions, the 2018 of the Ed Brown Classic Custom features slide flats that sport a mirror finish to contrast with the glass bead finished frame. The top of the slide is flattened and grooved, offering a no glare runway effect that the company says “guides your eye” to the gold beat front sight. Meanwhile, the back of the slide includes 50 LPI serrations to match the deep buried adjustable rear sight. In addition, the front strap and mainspring housing are finished in Ed Brown’s skip-line checkering.

Other features on the updated Ed Brown Classic Custom include a five-inch barrel; two-piece guide rod; custom slide rib; and a magazine catch with an oversized 40 LPI checkered button.

This gun is chambered in 9mm (stainless only), .38 Super (stainless only) and .45 ACP. Its overall length is 8.75 inches. The overall height is 5.75 inches. In addition, the gun weighs in at 40 ounces with an empty magazine. The capacity on this 1911 is seven rounds.

In the press release, Ed Brown describes this Classic Custom as an opportunity for its “gunsmiths to display their talent and share it with the world. Each option was carefully chosen for a traditional, yet unique pistol for the most discerning buyer. It has all the bells and whistles, and includes those extra enhancements that you don’t really need, but really want.”

The MSRP on the new Ed Brown Classic Custom 1911 is $3,695. See the specs and a video below.

For more on Ed Brown, visit edbrown.com.

2018 Ed Brown Classic Custom 1911

  • Available Calibers:  9mm (Stainless slide only), 38 Super (Stainless slide only), 45 ACP
  • Barrel Length:  5″
  • Weight: approximately 40 ounces with an unloaded magazine inserted
  • Model: CC18-BB (Blue), CC18-SS (Stainless)
  • 5″ Government model slide, single stack government model frame
  • Weight: approximately 40 ounces with an unloaded magazine inserted
  • Skip-line checkering on forestrap and mainspring housing
  • Special mirror finished slide
  • 50 LPI serrations on back of slide to match serrated adjustable sight
  • Adjustable rear sight buried deep into slide, gold bead front sight
  • Two-piece guide rod for smoother cycling and easier disassembly
  • Mag catch with oversize 40 LPI checkered button
  • Custom slide rib

 

The post New Handgun: The 2018 Ed Brown Classic Custom 1911 appeared first on Personal Defense World.

NOW SHIPPING: The Ideal Conceal Folding Cell Phone Pistol

$
0
0
Ideal Conceal pistol folded Ideal Conceal pistol unfolded Ideal Conceal pistol parts

A couple of years ago, a certain pistol made headlines after reporters latched onto the fact that it looked like a smartphone when folded. The name of that pistol was the Ideal Conceal. It appears that pre-orders of the Ideal Conceal are now shipping out to customers.

In an update posted to YouTube on July 9, which you can see below, Ideal Conceal CEO Kirk Kjellberg confirmed that pre-orders of the gun are shipping in the order in which they were paid. He also said a few dealers were receiving pre-orders. In addition, Kjellberg stated that the company is developing a line of exclusive holsters to accommodate the gun.

The Ideal Conceal is a .380 ACP derringer that, when folded, is roughly the same size as a Samsung Galaxy S7. To unfold it, you grip and rotate the handle away from the body of the firearm. When fully extended, the handle locks into place. To return the handle to the closed position, you depress the handle lock buttons on either side and rotate the handle in the opposite direction.

To load the Ideal Conceal, you open the breach block by sliding the breach block latch away from the muzzle. Then, you rotate the breach block away from the latch. Next, you insert two .380 ACP rounds into the chambers. Finally, you close the breach block by rotating it into a closed position.

The ATF has stated that the Ideal Conceal is not a NFA firearm.

The Ideal Conceal is listed at $575 on the company’s website. Check out the specs on the gun, as supplied by The Firearm Blog in a review a couple of months ago. In addition, see the progress update, as well as a video showing the Ideal Conceal in action.

For more, visit idealconceal.com.

Ideal Conceal Specs

  • Weight: 18.3 Ounces (Unloaded)
  • Length: 5.5″
  • Width: 0.75″
  • Height: 3″ (Collapsed; Folded In)
  • Height: 5.1875″ (Extended; Folded Out)
  • Body & Frame is 100 percent Aluminum
  • Made in the U.S.A.

The post NOW SHIPPING: The Ideal Conceal Folding Cell Phone Pistol appeared first on Personal Defense World.

How the Walther PPK & Mauser HSc Shaped Modern Pocket Pistols

$
0
0
walther ppk mauser hsc pistols walther ppk mauser hsc pistols top bottom walther ppk mauser hsc pistols side by side walther ppk pistol right profile mauser hsc pistol left profile walther ppk pistol draw walther ppk pistol aiming mauser hsc sights walther ppk pistol sights mauser hsc pistol hammer

On July 20, 1944, German Lieutenant Colonel Claus von Stauffenberg slipped a leather satchel underneath a briefing table at Adolph Hitler’s Wolf’s Lair headquarters near Rastenburg, East Prussia. Leaving the room on a prearranged pretext, von Stauffenberg departed the complex. The 2.2 pounds of plastic explosive packed into the satchel remained behind on a 10-minute fuse.

Von Stauffenberg was a German aristocrat and military hero. Badly wounded in an Allied air attack in Tunisia in 1942, von Stauffenberg lost his left eye, two fingers on his left hand, and his right hand at the wrist. As a result of his wounds, von Stauffenberg was removed from active combat and, after his convalescence, posted as a staff officer with the German Replacement Army in Berlin. Tradition holds that his sidearm was a Walther PPK, one of the few handguns that he could still safely operate despite his handicaps.

The bomb detonated underneath the heavy oak briefing table; one of its legs reportedly shielded Hitler from much of the ensuing blast. Four of those in attendance died while Hitler escaped with ruptured eardrums and superficial wounds. Subsequent events unfolded quickly and ferociously.

The original plan had von Stauffenberg returning to Berlin to help organize a coup that would ultimately replace Hitler and pursue peace with the Allies. However, Hitler’s rapid personal intervention with the military units involved regained the initiative in short order. Generaloberst Friedrich Fromm, originally an active conspirator in the plot, attempted to save himself by ordering that von Stauffenberg and his compatriots be arrested. Surrounded in the Bendlerstrasse headquarters of the army, von Stauffenberg and his friends engaged in a brief shootout with their personal sidearms before being captured and disarmed. In the course of the engagement, von Stauffenberg was shot through the shoulder with a jacketed pistol bullet.

Generaloberst Fromm had the plotters summarily executed later that evening but failed to insulate himself from his involvement. Fromm was later killed on orders from Hitler along with 4,979 other Germans, many of whom had no reliable connection to the plot. Under Gestapo head Heinrich Himmler’s Sippenhaft (literally “blood guilt”) laws, many of the conspirators’ families were arrested as well. While the plot failed to kill Hitler and end the war, Hitler, in his vengeful rage, murdered a large number of military officers and deprived the Wehrmacht of a great deal of otherwise effective leadership.

Pistol Philosophies

The Germans in World War II viewed the military sidearm somewhat differently than their American adversaries. The Colt Model 1911A1 service pistol that armed American soldiers was a mule of a combat handgun. Originally contrived by the visionary John Moses Browning to combat Moro insurgents in the Philippines in the early days of the 20th century, the M1911A1 weighed 2.44 pounds unloaded and launched projectiles nearly as wide as a man’s thumb. Heavy, bulky and powerful, the M1911A1 was an effective close-combat tool.

By contrast, German officers were armed with a variety of handguns drawn from a variety of sources. The exigencies of WWII rapidly outstripped their production capacity, so the Germans built, borrowed, bought and stole handguns from sources throughout their own country as well as their occupied territories. The result was a deplorable lack of standardization.

The iconic Luger P08 and the revolutionary Walther P38 were both full-sized handguns that launched Georg Luger’s timeless 9mm round. These capable sidearms were some of the most prized souvenirs available to American GIs back in the heady days when we trusted our returning heroes with such stuff. Many German officers, however, carried what we might call “pocket pistols” in today’s parlance. The pocket guns the Germans developed in WWII went on to shape the landscape for modern defensive pistols today.

Walther PPK

Carl Walther released the PP (Polizeipistole) in 1929. Intended for police use, the PP incorporated several unique features that have since become commonplace. Produced in .22 LR, .25 ACP, .32 ACP, .380 ACP and 9x18mm Ultra, PP series pistols operated via simple unlocked blowback. The tidy little gun included an automatic hammer block safety, a combination safety/decocker and a loaded-chamber indicator. The most revolutionary aspect of the weapon, however, was its double-action/
single-action (DA/SA) trigger.

Adapted from the DA revolvers of the day, the DA/SA trigger on the PP allowed the gun to be carried safely with a round in the chamber and the hammer in the relaxed position. In such a state, the first round is fired via a long, heavy DA trigger pull. Subsequent rounds require a much lighter, shorter SA trigger pull that better lends itself to precision.

More PPK Details

The magazine release is a push button located on the left side behind the pistol grip, and the rotating safety/decocker is mounted on the left aspect of the slide. The slide locks back after the last round is fired. Absent a manual slide release, the shooter simply replaces the magazine, draws the slide slightly to the rear and releases the assembly to recharge the gun. The sights are tiny and about useless—just like everybody’s sights back then. Finally, the ring-style hammer is knurled.

Walther released a shorter version of the PP called the PPK (Polizeipistole Kriminalmodell) in 1931 intended for undercover detective use. This became the definitive variant. Weighing a mere 21 ounces and remaining small enough to hide in the palm of your hand, the PPK went on to arm Ian Fleming’s fictional MI-6 agent James Bond, and subsequently earn a worldwide following. Walther still produces the gun today. By pressing the forward aspect of the slide against the angle of a tabletop, von Stauffenberg could charge his PPK one-handed.

Mauser HSc

Mauser’s counterpart to the Walther PPK was the HSc (Hahn Selbstspanner, or “self-cocking hammer”). Like the PPK, the HSc operated via unlocked blowback. Designed by Alex Seidel in 1935 and initially produced in 1940, the HSc was originally marketed for commercial use. However, the necessities of total war meant that the German Kriegsmarine, Wehrmacht, Luftwaffe, and Waffen SS purchased the HSc in large quantities.

After the war, the Mauser plant fell within the French zone of occupation. The French oversaw production of the gun through 1945 and 1946. Most of these weapons were shipped to Indochina for use by French forces fighting the insurgency there. Mauser recommenced commercial production of the HSc from 1968 to 1977. The majority ended up on the American commercial market. Sporting rakish lines and some combat features not equaled even today, the HSc was decades ahead of its time.

Masterful Mauser

The drum-shaped hammer is nestled within the back of the frame so that only the tiniest lip of steel remains exposed. However, this component remains easily accessible while unobtrusive. The safety on the HSc is a familiar rotating lever on the left aspect of the slide, but it does not decock the gun automatically. To “safe” the weapon, one applies the safety and then pulls the trigger while riding the hammer forward with the thumb. Should the need arise, the HSc can even be carried in “Condition One” with the safety on and the hammer back.

The magazine release is heel mounted, as was frequently the case with European handguns. Like the PPK, the slide on the HSc locks to the rear after the last round is fired. There is no manual slide release. Unlike the PPK, removing or reinserting the magazine, empty or full, automatically drops the slide. When the gun runs dry, you simply remove the empty magazine and replace it with a fresh one. The slide runs forward automatically. Even on modern designs, nothing is faster.

Old Vs. New

Aside from the extra weight begat by their steel frames, the wartime PPK and HSc pistols remain competitive defensive handguns even today. The DA triggers are atrocious, but so are those of most modern DA defensive pistols. Striker-fired guns like the Glock 43 perfuse the modern marketplace, but the argument can be made that the old PPK trigger is safer—particularly for a pocket pistol.

Many modern defensive guns employ some miniaturized variation of John Browning’s link-less recoil-operated action. This design does indeed result in a thinner pistol, with less felt recoil than an unlocked blowback design. However, most pocket pistols run fairly anemic cartridges that don’t really require a lot of mechanical complexity for reliable operation.

More Comparisons

On the range, I can shoot as well with my old Mauser HSc as I can with my modern Smith & Wesson Bodyguard, both chambered for the same .380 ACP round. In fact, the DA/SA trigger on the HSc is markedly nicer. Call me a heretic, but considering that a pocket pistol will only be employed at bad-breath ranges, things like the trigger pull, innate mechanical accuracy and even the sights (or lack thereof) don’t make a big difference. A pocket gun needs to be safe, snag-free and mechanically dependable while pointing naturally. The PPK and HSc do all of those things reliably and well.

The .32 ACP cartridge that most German wartime pocket guns fired is anemic by modern standards. Particularly launching FMJ rounds, the stopping power of this little bullet is questionable at best. In the aforementioned vignette, von Stauffenberg was shot through the shoulder yet remained healthy enough to survive for several hours without medical attention until he was ultimately executed by firing squad on the grounds of the German army headquarters building early the following morning.

Where American combat handguns were powerful enough for use in life-or-death close-combat situations, German pocket pistols were frequently a badge of rank or a tool for either execution or suicide. Adolph Hitler used his personalized .32 ACP PPK to take his own wretched life on April 30, 1945. In such applications, the lack of energy intrinsic to the .32 ACP is not such a detriment.

Making History

The Nazis were notorious villains, and even today, they still make the best bad guys in print or film. It is not by random chance that Darth Vader and his Stormtroopers terrorize the “Star Wars” universe cloaked in thinly veiled Nazi iconography. Despite their obvious moral corruption, the Nazis drove some of the most innovative military developments in history.

Revolutionary features introduced in the Walther PPK and the Mauser HSc perfuse our contemporary defensive guns. Trigger designs, safety features and morphological characteristics that had their genesis in the 1930s can be found on the shelves of modern American gun stores rendered in stainless steel and Information Age polymer. For all of their awful wickedness, the Germans in WWII actually indirectly designed many of the guns we frequently pack for personal protection today.

Walther PPK & Mauser HSc

Manufacturer Walther PPK Mauser HSc
Caliber .32 ACP .32 ACP
Barrel 3.3 inches 3.4 inches
OA Length 6.1 inches 6 inches
Weight 21 ounces (empty) 25 ounces (empty)
Grips Plastic Wood
Sights Fixed Fixed
Action DA/SA DA/SA
Finish Blued Blued
Capacity 7+1 8+1

Editor’s Note: Special thanks to worldwarsupply.com for providing the period German gear used in preparing this article.

This article was originally published in “Concealed Carry Handguns” 2018 #211. To order a copy and subscribe, visit outdoorgroupstore.com.

The post How the Walther PPK & Mauser HSc Shaped Modern Pocket Pistols appeared first on Personal Defense World.

Viewing all 1633 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>